FLIR SC2500 - INFRARED CAMERA « Back

FLIR SC2500-NIR Fully integrated near infrared camera for scientific studies, R&D, and critical processes product Overview FLIR’s SC2500-NIR near infrared camera.
FLIR SC2500-NIR Fully integrated near infrared camera for scientific studies, R&D, and critical processes product Overview FLIR’s SC2500-NIR near infrared camera is designed to satisfy the requirements of a wide range of science and research applications. Its design makes it the only fully integrated camera covering the spectral range of 0.9µm to 1.7µm that combines thermal imaging and non-contact temperature measurements with superior data acquisition capabilities. While most competitive NIR cameras are simply thermal imagers, the SC2500-NIR provides accurate non-contact temperature measurements. The camera is able to be calibrated for temperatures up to 2000˚C. All required image processing electronics are embedded in the camera to deliver sharp, ready-to-use images. Other capabilities include high frame rates, flexible integration times, lock-in signal processing, spectral filtering, and a Gigabit Ethernet digital interface for seamless connection to standard PCs and laptops. Typical Applications and Users With pricing comparable to NIR cameras having far fewer features and capabilities, the SC2500-NIR will be of great benefit in scientific research, imaging spectroscopy, astronomy, water or ice detection, laser profiling, medical procedures, Sodar cell inspection, silicon wafer processing, and many manufacturing applications.
Key features:
• Sensor Array Material: InGaAs
• Pixel Configuration: 320 x 256 array with 30µm pitch
• Spectral response: 0.9 – 1.7µm (optionally, 0.4-1.7µm)
• Full frame rate: 340Hz (15kHz max. with 128 x 8 pixel windowing)
• Data Acq. Integration Time: 400ns – 1sec in 1µs steps
• Optical Interface: Removable C-mount with filter holder
• Filter Holder: For neutral density and spectral filters, 25.4mm x 2mm thick
• Inputs: Trigger and Lock-in signals (enhances signal capture capabilities)
• Outputs: Analog (NTSC and PAL) and Digital (GigE and CAMLINK)
More Products from Supreme Technology & Energy Solutions Australia Pty Ltd:
MEGGER DLRO200 DIGITAL MICROHMMETER • Small and weighs less than 15kg • Test currents from 10 A to 200 A d.c. • 0.1 µO best resolution • On board memory for up to 300 test res
The L1050 Portable Locator is a one-piece design that is lightweight and highly accurate. Operating the receiver at multiple frequencies optimizes performance.
Fixed mount thermal imaging cameras for research and development applications The FLIR SC305, SC325, SC645 & SC655 is a fixed mount thermal imaging.
FLIR T425/B425 INFRARED CAMERAS ARE SMALL, COMPACT AND POWERFUL INFRARED CAMERAS.
The TM1600™ circuit breaker analyzer measures a circuit breaker’s timing cycle. The timing channels record closings and openings of main contacts, resistor contacts.
NEUMANN KPG 50 KV DC TWO-PART PORTABLE HIGH VOLTAGE CABLE TEST SET Neumann Elektrotechnik GmbH Germany For Testing Power Cable Systems With Direct Voltage. Available In Four V
FLIR 1196497 i / b / T / B SERIES CAR CIGARETTE CHARGER In Car charger for Flir thermal imaging cameras.
FLIR ResearchIR 1.2 FLIR ResearchIR is a part of the FLIR R&D software family.
The Split-box Pipe and Cable Locator is a hand-held instrument in the classic "split-box" design, consisting of a transmitter and a receiver.
The CB-845 test set is a high-current circuit breaker test set consisting of a control unit that incorporates the latest in solid-state metering, control technology.
HIOKI 3423 LUX HiTESTER Digital illumination meter, maximum scale of 199,900 lux • Easy-to-operate, hand-held unit. • From the low light up to a maximum intensity of 199,900 l
This fully automatic test set has been designed to provide a comprehensive ac insulation diagnostic test for high voltage apparatus, such as transformers, bushings.
High-resistance connections in the secondary circuit. Grounding of secondary winding when mounted on a grounded structure.
The new 10 kV insulation resistance testers from Megger are designed specifically to assist you with the testing and maintenance of high voltage electrical equipment.
With the ability to to conduct soil resistivity, and 2 and 3 pole earth electrode testing the DET4TR2 offers the user full flexibility with an increased measurement range
FLIR A315 INFRARED CAMERA - Fixed mounted infrared cameras like FLIR A615/A315 can be installed almost anywhere to monitor your production process by detecting and measuring.
MEGGER MIT520/2 DIAGNOSTIC INSULATION RESISTANCE TESTER 5KV designed specifically to assist you with the testing and maintenance of high voltage electrical equipment. The case
The 99800 Series E-Z Test
TM Meter Test Jacks are designed to increase safety and to simplify testing of socket-type watthour meters.
This FLIR 45° Wide-angle Lens has a FoV (field of view) almost double the standard kit lens.
Hioki 3198 Power Quality Analyzer PW3198 compliance with the IEC 61000-4-30 Class A. The New World Standard for Power Quality Analysis, with recording & analyzing:- Verify ..
FLIR Reporter 8.5 Professional is a powerful software for creating compelling and professional reports.
FLIR T365/B365 INFRARED CAMERA SMALL, COMPACT AND POWERFUL INFRARED CAMERAS The FLIR T335, T365 and T425 are innovative, feature rich infrared cameras.
Rechargeable basic kit for earth system testers for four pole testing and enabled for attached rod and stakeless techniques.
HIOKI 3196 POWER QUALITY ANALYZER is your most reliable and complete instrument for power quality troubleshooting! Monitor and record the quality of power to analyze the cause
FLIR SC325 INFRARED CAMERA Fixed mount thermal imaging cameras for research and development applications The FLIR SC305, SC325, SC645 & SC655 is a fixed mount thermal imaging.
HIOKI 3390 POWER ANALYZER Measure the Secondary Side of Inverters with Cutting Edge Technology • Advanced motor analysis functions (measures the electric angle and supports...
The PAM360E Digital Phase Angle Meter is specifically designed for measurements on electrical power systems.
This Primary Current Injection Test Set is rugged, self-contained and designed for operation by one person. The PCITS2000/2 is a two-wheeled unit (with a handle).
Battery Impedance Test Equipment Receiver. The BITE Receiver is a direct replacement for the standard receiver supplied with the original BITE.
NEUMANN KPG 25 KV DC PORTABLE HIGH VOLTAGE TEST SET - Neumann Elektrotechnik GmbH Germany Compact high voltage test set for testing power cable systems and electrical plants w
The MTO210 Transformer Ohmmeter is a line-operated, field-portable instrument designed specifically to measure the dc resistance of all types of magnetic windings.
Housing plastic transparent Max. counting speed 10 pulses/sec. Counting adding without reset Operating voltage 3V, 5V, 12V, 24V DC ± 10%.
FREJA 306 can be operated with or without a PC. After being put into the Local mode, FREJA 306 can be used stand-alone without a PC.
FLIR SC5000 SERIES Complete range of high performance, ultra fast & large format infrared cameras for industrial applications The FLIR SC5000 Series is the most advanced
The Megger Low Current Adapter (LCA) is a small, light-weight, field portable, unit specifically designed to provide multiple precise very low current sources
The DDA-16, -30, -60 use the latest in DSP technology to control the circuit breaker test sets and also measure the reactions of the breaker under test.
HIOKI 3290 / 3290-10CLAMP ON AC/DC HiTESTER All the Functions You Need for Measurement at DC or 1Hz and Up • Choice of three sensors (Example combinations), 3290/3290-10 +9691
This versatile instrument is designed as a sequence of events recorder, to monitor and time inputs and enable the user to conditionally control outputs.
Megger offers a complete line of accessories to enhance the capabilities of the BITE product line. RopeCT, Probe Extensions, Bar Code Wand, Digital Hydrometer, Miniature CT.
FLIR i60 INFRARED CAMERA LIGHTWEIGHT DESIGN, HEAVYWEIGHT PERFORMING INFRARED CAMERAS.
The MR-4s record voltage and current at the meter. It is installed quickly and safely. There are no external boxes or connections, and no customer panel boxes left open.
Battery Impedance Test Equipment. The BITE3 measures cell impedance, an internal ohmic test, cell voltage, intercell connection resistance and ripple current.
The RISH DPM 24 X 96 S are digital panel instruments for measurement of DC current and DC voltage with 10 measuring ranges. 5 ranges for power supply are available.
The FRAX 101 Sweep Frequency Response Analyzer (SFRA) detects potential mechanical and electrical problems that other methods are unable to detect.
Portable cable fault location and high voltage test solution. The new PFL40A family of compact Megger cable fault locating systems is designed to meet this criterion.
The Suitcase Impulse Generator is a lightweight and portable fault locating set that can be carried by one person and is effective on exposed cables rated up to 15 kV.
FLUKE 1623 AND 1625 EARTH GROUND TESTERS FLUKE 1623 and 1625 are distinctive earth ground testers that can perform all four types of earth ground measurement. Specifically, th
Three terminal earth ground resistance testers. Complete with leads, stakes and rugged carry case.
The Programma EGIL is an automatic timer and motion analyzer for medium- and high-voltage substation circuit breakers.
The Megger MCT1600B test set is a lightweight, robust, portable unit used to automatically or manually perform saturation, ratio, polarity, burden tests and insulation tests.
Effective circuit breaker maintenance requires well-organized, accurate testing.The ability to accurately compare circuit breaker tests with previous test results is essential
IDAX 300 measures the capacitance and tan delta/power factor of the insulation between power transformer windings at multiple frequencies.
A variable DC voltage is needed to test a circuit breaker. Substation batteries should not be used since this entails considerable risk for testing personnel.
Counting adding without reset Operating voltage 6, 12, 24, 48, 110, 230 V AC ± 10%. Operating life 20 x 106 pulses Cycle duration factor 100% (max. 20 sec at 230 V AC).
FLIR A300 INFRARED CAMERA - The FLIR A-Series fixed mounted infrared cameras gives you peace of mind. They keep watch on your production site with their infrared eye.
The SLM-8 is a low cost, 8-channel paperless recording volt-ammeter for measuring and recording the true RMS values of up to 4 voltage channels and 4 current channels.
Yhe S1-552/2 was designed specifically to assist you with the testing and maintenance of high voltage electrical equipment. The case is incredibly rugged and easy to carry.
Precision class 1 Reference voltage [V] 220, 230, 240 Reference frequency [Hz] 50 or 60 Rated current [A] 5,10 Maximum current [A] 100 Starting current [A] ≤0.004 lb
FLIR T425 IR CAMERA The information below outlines the powerful features that contribute to the FLIR T-Series infrared cameras' world performance.
Cross coil movement, sintered anti-friction bearings and delrin-moulded gears ensures trouble-free operation. New rugged design to withstand industrial environment.
FLIR E40 IR CAMERA is the best value in Thermal Imaging and Digital Camera Resolution We've Ever Offered. With up to 76,800 pixels at 320 × 240 resolution
FLIR E50 IR CAMERA is the best value in Thermal Imaging and Digital Camera Resolution We've Ever Offered. With up to 76,800 pixels at 320 × 240 resolution
This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers.
Model PS-9116 offers the latest developments in high-current transformers and microprocessor-based control. It combines lightweight, modular portability.
With the ability to to conduct soil resistivity, and 2 and 3 pole earth electrode testing the DET4TD2 offers the user full flexibility with an increased measurement range.
FLIR SC645 INFRARED CAMERA Fixed mount thermal imaging cameras for research and development applications The FLIR SC305, SC325, SC645 & SC655 is a fixed mount thermal imaging.
FLIR GF306 – INFRARED CAMERA Detects the Expensive and Harmful SF6 Gas FLIR GF306 detects and visualizes SF6 (Sulfur Hexafluoride) and 24 other harmful gases quickly.
Megger KF875 and KF-LAB MkII Coulometric Karl Fischer Test Sets designed to determine moisture in oil, to provide highly accurate results on-site.
High Voltage DC Dielectric Test Sets provide the most dependable, portable DC highvoltage sources for checking the quality of electrical power cables, motors, switchgear.
NEUMANN KPG 38KV VLF & 50KV DC PORTABLE CABLE TEST SET - Neumann Elektrotechnik GmbH Germany The portable cable test sets KPG 20kV VLF and KPG 38kV VLF are used for testing of
Model CBS-1 and Model CBS-2 Circuit Breaker Stab Sets allow connection to virtually all Megger circuit breaker test sets.
This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers.
A timer is often needed for use with the CSU600A current supply unit or ODEN A primary current injection test system.
HAOMAI CTP-200 MULTIFUNCTIONAL CT ANALYZER, CTP-200 MULTIFUNCTIONAL CT AND PT ANALYZER, HAOMAI CTP-200 CT & PT ANALYZER, HAOMAI CTP-200 CT & PT TESTER, HAOMAI CTP-200 MULTIFUN
MCTT-10 provides a variable voltage output and digital instrumentation for measuring the excitation voltage and excitation current.
NEUMANN KPG 80 KV DC TWO-PART PORTABLE HIGH VOLTAGE CABLE TEST SET Neumann Elektrotechnik GmbH Germany For Testing Power Cable Systems With Direct Voltage. Available In Four V
Standard Arc Reflection Filter and Heavy-Duty Arc Reflection Filter (detachable). With Arc Reflection Filters, cable faults can be located on power cables rated at up to 35 kV
HIOKI 8870-20 MEMORY HiCORDER 2 Analog and 4 Logic Channels Easy recording anytime, anywhere! Compact and easy to carry, Easy, intuitive operation, Simple PC connection, Fast,
The new 10 kV insulation resistance testers from Megger are designed specifically to assist you with the testing and maintenance of high voltage electrical equipment.
The DET2/2 digital ground resistance tester provides a wide resistance range from 0.010 Ω to 19.99 kilohms for testing larger or more complex grounding systems
The OTS60SX is a lightweight, semi-automatic, oil dielectric strength test set. The instrument is suitable for field use and is powered from a range of line voltages.
Designed for testing in the laboratory, shop or substation, Model CB-100 is a self-contained instrument that accurately measures insulation characteristics.
The S1-554/2 was designed specifically to assist you with the testing and maintenance of high voltage electrical equipment. The case is incredibly rugged and easy to carry.
FLIR T365 IR CAMERA has powerful features that contribute to the FLIR T-Series infrared cameras' world performance.
Accessory Voltage Calibration Meter for use with the MEGGER AF/2 Series.
Better than 50 mega ohms at 500v between the electrical circuit and the containing case. Withstand 2kv AC (rms) between the electrical circuit and the handle for one minute.
PFL20M Power Cable Fault Locator System. The PFL20M1500 Power Fault Locator System is designed to meet power industry requirements for power cable fault location.
The Megger TTR25 is an automatic hand-held battery operated transformer turns ratio test set.
Megger offers a comprehensive line of both flexible and clamp-on current transformers that are used with power quality analyzers and recording volt-ammeters.
Megger BM5200 is a battery powered insulation tester with digital and analogue arc display, designed for high voltage insulation resistance testing in the maintenance.
Rechargeable battery powered 4-terminal tester with selectable test frequencies, greater measurement sensitivity and attached rod technique
The PMM-1 is a portable, battery or line operated, multi-function measuring instrument designed to measure ac primary and secondary currents, voltage power, reactive power.
FLIR i5 INFRARED CAMERA Infrared revolution - Affordable infrared camera offers professional-grade resolution at entry-level price.
The AccuTrace Cable Route Tracer consists of a transmitter, which energizes the line with a traceable signal, and a portable receiver, which detects the signal.
The Megger MEIU adds high-current, high volt-ampere output capability to the MPRT relay testing capability.
The Electromagnetic Impulse Detector has been designed to localize faults on buried cable by detecting the magnitude and polarity of current established on a cable.
HAOMAI CTP-200 CT & PT ANALYZER, HAOMAI CTP-200 CT & PT TESTER, HAOMAI CTP-200 MULTIFUNCTIONAL CT AND PT ANALYZER is a revolutionary CT and PT test instrument developed after
Housed in light and compact ABS case. Option ITV: Voltage Measurement (500V AC/DC).
FLIR QUICKPLOT 1.2 FLIR QuickPlot software is aimed at R&D users of infrared cameras wanting to get an understanding on thermal events.
FLIR i50 INFRARED CAMERA - LIGHTWEIGHT DESIGN, HEAVYWEIGHT PERFORMING INFRARED CAMERAS.
The rugged PA-2505K Phantom Load operates from a single-phase source and is designed for field-testing single-phase and polyphase watthour meters at 50 and 100% power factor.
HIOKI 8847 MEMORY HiCORDER is the Ideal Recorder for simultaneous recording of multiple signals in Field Use, Easy Portability and Sturdy Construction. • High-speed sampling.
FLIR T640 IR CAMERA The Most Flexible, Innovative and Highest Quality Professional-Grade Hand-held Thermal Cameras Ever.
The Model NTS-300 is a self-contained, two-piece test set designed for complete testing of General Electric and Westinghouse secondary network protectors.
With Model CTER-91 current transformers can be tested while mounted in transformers, oil circuit breakers breakers or switchgear - without moving bushings and CTs.
The digital panel meter RISH DPM 48 X 96 have been designed for industrial applications, which frequently require precise, on - site adjustment of the display range.
FLIR SC7900 VL High QE, MCTFLIR E40BX IR CAMERA is the Best Value in Thermal Imaging and Digital Camera Resolution We've Ever Offered.
HIOKI 3169-20, 3169-21 CLAMP ON POWER HiTESTER HIOKI 3169-20, 3169-21 CLAMP ON POWER HiTESTER • Monitor Power & Demand management at single-phase 4-circuits, three-phase 2-cir
The DELTA3000 is a fully automatic 10 kV insulation power factor test set designed for condition assessment of electrical insulation in high voltage apparatus.
FLIR SC7000 SERIES Complete Range of State-of-the-art Infrared Technology Systems for R&D and Thermography. The FLIR SC7000 Series is a very flexible camera
FLIR E50BX IR CAMERA is the best value in Thermal Imaging and Digital Camera Resolution We've Ever Offered. With up to 76,800 pixels at 320 × 240 resolution.
The PA9Plus has been introduced based on the success of the PA9 and has enhanced standard key features including a faster Digital Signal Processor.
FLIR ORION SC7000 SERIES MW & LWIR Multispectral Imaging System for R&D and Signature Analysis The FLIR Orion SC7000 Series system is an infrared multispectral imager.
FLIR GF309 - INFRARED CAMERA Infrared Camera for Furnace and Electrical Inspections The FLIR GF309 is designed for high temperature industrial furnace applications.
The SCITS100 Secondary Current Injection Test Set has a maximum rating of 100 A/1,8 kVA and a built-in timer unit.
Model PS-9130 and Model PS-9160 Series Universal Circuit Breaker Test Sets are specifically designed to test low-voltage power circuit breakers.
The Megger TPT220 voltage tester features an LCD display that provides a.c. and d.c. voltage measurement from 6 to 1000 volts
Battery Test Equipment. The Battery Ground-Fault Tracer accelerates fault location by eliminating trial-and-error procedures and because faults can be located.
HAOMAI CTP-200 MULTIFUNCTIONAL CT AND PT ANALYZER is a revolutionary CT and PT test instrument developed after widely adopting customers' feedback and making deep theoretical
The MEGGER DUCTER DLRO10 and DUCTER DLRO10X bring new standards to low resistance measurement. Both are fully automatic instruments, selecting the most suitable test current.
The SI-5010 is an advanced insulation tester for measurement of insulation resistance of all types of electrical equipment. The instrument performs automatic tests.
Dual-voltage, Heavy-duty Impulse Generators. Impulse Generators are designed to locate faults in power cable by the high voltage impulse method.
Quick and easy check for a.c. voltage. Check for the presence of a.c. voltage, signalled by a bright red LED situated with in the white nylon tip.
FLIR SC7900 VL High QE, MCT-based Extended Long Wave FPA Infrared Camera for Spectroscopy or Gas Analysis The FLIR SC7900-VL incorporates a high QE 320x256 element.
The Resonating Inductor is an accessory for use with the semi-automatic 12 kV Extended-Range Capacitance and Dissipation Factor Test Set.
FLIR T335 IR CAMERA has powerful features that contribute to the FLIR T-Series infrared cameras' world performance.
The PHAZER family of watthour meter test sets are true three-phase, fully automatic systems capable of testing virtually all types of ANSI socket- mounted
The SST-9203 Solid-State Digital Timer combines ruggedness and reliability with state-of-the-art technology to make it an accurate and versatile timing instrument.
The Single Phase TTR, Transformer Turns Ratio Test Set, measures the turns ratio and exciting current of windings in power, potential and current transformers.
WORLD ENERGY LABS INTERROGATOR 4210B ELECTROCHEMICAL BATTERY ANALYZER Interrogator 4210B ElectroChemical Battery AnalyzerWORLD ENERGY LABS (WEL) is a leading manufacturer of b
FLIR BUILDIR 2.1 FLIR Reporter Building is a software package specifically designed to carry out advanced analyses of building structures.
Battery load tester for telecoms applications. During a power outage, crucial telecommunication and radio equipment must be kept operating by batteries.
Portable cable fault location and high voltage test solution with high energy surge. The new PFL40A family of compact Megger cable fault locating systems.
The DDA-3000 and DDA-6000 are designed specifically to test low-voltage power and molded-case circuit breakers equipped with thermal, magnetic or solid-state trip devices.
NEUMANN KPG 120 KV DC TWO-PART PORTABLE HIGH VOLTAGE CABLE TEST SET Neumann Elektrotechnik GmbH Germany For Testing Power Cable Systems With Direct Voltage. Available In Four
FLUKE 1623 KIT, BASIC GEO EARTH GROUND TESTER For all your Earth Ground Testing Applications. FLUKE 1623 and 1625 are distinctive earth ground testers that can perform all fou
FLIR 1196961 IR LENS F = 30 MM, 15° incl. Case This FLIR 15° Telephoto Lens provides a huge 1.7x magnification compared to the standard kit lens.
HAOMAI CTP-200 CT & PT TESTER, HAOMAI CTP-200 MULTIFUNCTIONAL CT AND PT ANALYZER is a revolutionary CT and PT test instrument developed after widely adopting customers' feedba
FLIR SC2000 SERIES Near IR Camera with Extended Wavelength from 0.8 µm to 2.5 µm The FLIR SC2000 Series infrared camera is a high performance near infrared camera.
FLIR SC600 SERIES INFRARED CAMERA - High Sensitivity Uncooled Infrared Camera for Scientific Applications The FLIR SC620 and SC660 are advanced & accurate infrared cameras.
TORKEL® 840 - UTILITY is used for battery systems ranging from 12 to 250 V – often encountered in switchgear and similar equipment. Battery Load Units.
Megger Pinpointer. Specifically designed for service, industrial and power utility companies, the MPP1000 pinpoints faults in shielded and direct buried primary cables.
Precision class 1 Reference voltage [V] 220, 230, 240 Reference frequency [Hz] 50 or 60 Rated current [A] 5,10 Maximum current [A] 100 Starting current [A] ≤0.004 lb (Ib =R
FLIR A615 INFRARED CAMERA - Fixed mounted infrared cameras like FLIR A615/A315 can be installed almost anywhere to monitor your production process by detecting and measuring.
Model DDA-1600 is ideal for testing low-voltage breakers rated to 1600-ampere frame size. Incorporating the new Model DDA-1 Digital Data Acquisition Instrumentation.
FLIR T620 IR CAMERA is the most flexible, innovative and highest quality professional-grade hand-held thermal cameras ever.
The DC Dielectric Test Sets measure leakage current while applying a dc voltage at or above the insulation system's operating level.
FLUKE 1625 KIT, ADVANCED GEO EARTH GROUND TESTER For all your Earth Ground Testing Applications. FLUKE 1623 and 1625 are distinctive earth ground testers that can perform all
FLIR i3 INFRARED CAMERA Infrared revolution - Power to the People. Affordable infrared camera offers professional-grade resolution at entry-level price.
When a vacuum circuit breaker is commissioned or undergoes routine tests, it is very important to be able to ascertain whether or not the Vacuum Interrupter
FLIR SC655 INFRARED CAMERA Fixed mount thermal imaging cameras for research and development applications The FLIR SC305, SC325, SC645 & SC655 is a fixed mount thermal imaging.
FLIR T197926 TRIPOD ADAPTER adapter furnishes a ¼" x 20 helicoil insert. Two thumb screws are included to attach the tripod adapter to the Photon 640 camera.
A powerful test system designed for primary injection testing of protective relay equipment and circuit breakers.
The TTR300 Series of three-phase transformer turns ratio test sets are designed to measure the turns ratio of power, instrument, and distribution transformers in a substation.
Capable of locating long or short ranges, inductive or conductive, active or passive, the L1070 delivers quick and accurate results with a user-friendly interface.
The latest TTR available from Megger is the TTR100, a handheld, robust, lightweight and battery operated instrument.
FLIR E60 IR CAMERA is the best value in Thermal Imaging and Digital Camera Resolution We've Ever Offered. With up to 76,800 pixels at 320 × 240 resolution.
The CABA Win (Computer-aided Breaker Analysis) program has earned a benchmark reputation in circuit breaker analysis.
Precision class 1 Reference voltage [V] 220, 230, 240 Reference frequency [Hz] 50 or 60 Rated current [A] 5,10 Maximum current[A] 100 Starting current [A] ≤0.004 lb
The CB-832 test set is a high-current circuit breaker and overload relay test set. Model CB-832 is designed to test the circuit breaker and overload relays.
The digital panel meter RISH DPM 48 X 96 have been designed for industrial applications, which frequently require precise, on - site adjustment of the display range.
FLIR i7 INFRARED CAMERA Infrared revolution - Power to the People Affordable infrared camera offers professional-grade resolution at entry-level price FLIR i-Series for buil
Battery Impedance Test Equipment. The BITE 2 and BITE 2P Battery Impedance Test Equipment determine the condition of lead-acid and nickel-cadmium cells up to 7000 Ah.
Circuit Breaker Analyzer System. The TM1800 is the instrument platform for circuit breaker maintenance, based on more than 20 years’ experience of over 4,000 delivered breaker
The CA30 is a 3-channel current amplifier with a switched mode power supply capable of delivering up to 3x35 A. The DC-coupled design makes it suitable for acyclic generation.
These high-current supply units have two main fields of application. The first is to conduct primary tests on protective relays.
The FLIR i40 is a heavyweight performing infrared camera for spotting electrical problems, identifying mechanical issues and predictive maintenance.
The CHM Series of Cable Height Meters utilize ultrasonic sound to determine the height of up to six overhead cables and wires.
MEGGER TTR320 THREE-PHASE TRANSFORMER TURNS RATIO TEST SET The TTR300 Series of three-phase transformer turns ratio test sets are designed to measure the turns ratio of power,
FLIR T250 SMALL, COMPACT AND POWERFUL INFRARED CAMERA.
FLIR E60BX IR CAMERA is the best value in Thermal Imaging and Digital Camera Resolution We've Ever Offered. With up to 76,800 pixels at 320 × 240 resolution.
FLIR A310 INFRARED CAMERA - The FLIR A-Series fixed mounted infrared cameras gives you peace of mind.They keep watch on your production site with their infrared eye trained.
The MIT510/2 was designed specifically to assist you with the testing and maintenance of high voltage electrical equipment. The case is incredibly rugged and easy to carry.
The Cable Route Tracer is designed to locate, trace and measure the depth of buried energized power cables.
MEGGER DLRO10HD DUAL POWER 10 A DIGITAL MICROHMMETER • High or low output power selection for condition diagnosis • Rechargeable battery or line power supply, continuous opera
Measurement of Earth Resistance and Soil Resistivity. Sintered anti-friction bearing provide smooth and maintenance-free operation.
10 kV insulation resistance tester with high noise rejection. This product has been replaced by the S1-1054/2 which offers CAT IV safety.
The GOOSER™ is a general purpose IEC 61850-8-1 GOOSE test equipment. The GOOSER can convert a GOOSE message received on its rear Ethernet port into a binary output activation.
Model OCR-8015 and Model OCR-9150 Automatic Oil Circuit Recloser Test Sets are self-contained mobile test sets specifically designed to verify the proper operation.
The Megger MDP series of distribution profilers provides power utilities with the most accurate and extensive information ever to precisely evaluate loading on feeders.
HIOKI 3285 CLAMP ON AC/DC HiTESTER Analysis for DC to distorted waves • 2000 Arms, clamp aperture: 55 mm(2.17 in) dia. • Inrush current crest value • RMS value of full-wave re

Supreme Technology & Energy Solutions Australia Pty Ltd
Test Equipment Rentals, Hire, Sales & Calibration. We offer complete range of Energy Saving, Energy Efficiency, Power Quality Solutions Products and Energy Audit Services.
More»
Visit Storefront |
Website |
Contact
Contact Details :
Supreme Technology & Energy Solutions Australia Pty Ltd
15 Heath Drive, Caulfield Heath
Glen Huntly
VIC - 3163
Phone :03-9563-6157
Fax :03-9563-6158